Прихватам
Овај сајт користи колачиће, уколико наставите са његовим коришћењем сматра се да сте сагласни са нашом политиком приватности.
Љубиша Папић

Проф. др Љубиша Папић
Редовни професор у пензији
Ужа научна област: Ефекивност техничких система и Систем квалитета
Катедра за машинство

Факултет техничких наука у Чачку

Универзитета у Крагујевцу

Светог Саве 65

32102 Чачак
Србија


Тел.:  +381 032/302-716

Факс: +381 032/342-101

Број кабинета: 239

 ljubisa.papic@ftn.kg.ac.rs

Efektivnost tehničkih sistema

Dr Ljubiša Papić, Full Professor
Reliability Engineering
Quality Management
Born in 1952, B.Sc. 1979 (B.Sc. in Teaching Mechanical Engineering), M.Sc. 1986, Ph.D. 1992.
Field of specialization: Reliability Engineering and Quality Management.
Author of more than 370 scientific and professional papers (80 papers published on international scale), and author, co-author or reviewer of 7 textbooks and 4 monographs.

OSNOVNI BIOGRAFSKI PODACI

Prof. dr Ljubiša Papić je akademik Akademije za kvalitet Ruske Federacije, dopisni član Akademije inženjerskih nauka SCG, redovni profesor na Tehničkom fakultetu u Čačku, gostujući profesor na Ben-Gurion Univerzitetu u Izraelu i na Politehničkom Univerzitetu   Valensija u Španiji i bivši pomoćnik Ministra za nauku, tehnologiju i razvoj u Vladi Srbije. Diplomirao je na Tehničkom fakultetu u Čačku. Magistrirao je na Mašinskom fakultetu u Kragujevcu sa temom: "Istraživanje i prognoza pouzdanosti i veka upotrebe trakastih transportera na površinskim kopovima". Doktorirao je na Fakultetu tehničkih nauka u Novom Sadu sa temom: "Razvoj i automatizacija postupaka efektivnih ispitivanja za ocenu pozuadnosti tehnoloških sistema u industriji".

ISTRAŽIVAČKA DELATNOST

Iskustvo u privredi je stekao na poslovima tehničke pripreme građevinske mehanizacije u GP "Hidrogradnja" u Čačku. Učestvovao je u izradi 10 naučnih i tehnoloških projekata koje je finansiralo Ministarstvo za nauku Srbije. Za potrebe istraživanja, obrazovanja i privrednih primena razvio je tri softvera iz oblasti pouzdanosti tehnoloških sistema. Realizovao je veći broj instruktivnih seminara iz oblasti: povišenja konkurentnosti proizvodnje, primene metode FMEA, upravljanja održavanjem, preventivnog održavanja, kvaliteta u održavanju, efektivnog menadžmenta i dr.
Držao je predavanja po pozivu, pored ostalog, na: Beloruskoj Akademiji Nauka u Minsku i na Ruskoj Akademiji Nauka u Moskvi. Držao je poslediplomsku nastavu na Univerzitetu u Ekseteru (Engleska) i na Univerzitetu u Bradfordu (Engleska).

Kao autor i koautor objavio je i saopštio preko 370 naučnih i stručnih radova (od čega preko 80 u inostranstvu) iz područja Efektivnosti, Pouzdanosti i Kvaliteta tehničkih sistema. Autor, koautor ili redaktor 7 knjiga, i 4 monografije u odgovarajućoj naučnoj oblasti. Objavljivao je radove, pored ostalog, u sledećim međunarodnim časopisima: "Nadyozhnost i kontrol kachestva", "Vestnik mashinostroeniya", "Problemy mashinostroeniya i avtomatizatsii", "Metody manadzhmenta kachestva",   "Journal of Quality in Maintenance", "Production Planning and Control", "Mathematics and Computers in Simulation" i "Communications in Dependability and Quality Management". Ostvario je zapažene rezultate u razvoju naučno-nastavnog podmlatka na fakultetu, a posebno kroz mentorstvo 5 magistartskih teza i mentorstvo 4 doktorske disertacije: na Mašinskom fakultetu u Kragujevcu, na Tehničkom fakultetu u Čačku, na Mašinskom fakultetu u Banja Luci, na Mašinskom fakultetu u Podgorici i na Ben-Gurion Univerzitetu u Izraelu.

Usavršavanja:

1985, Technical University of Krakow, Institute of Transport, Krakow, Poland.
1987/88, University of Novi Sad, Institute of Industrial Systems Engineering, Novi Sad, Yugoslavia.
1988, Institute of Nuclear Sciences Vinca, Center of Logistics Engineering, Belgrade, Yugoslavia.
1989, Factory-Institute ZIL at the Moscow Motor Works, Moscow, Russia.
1989, Belorussian Academy of Sciences, Institute of Machine Reliability and Durability, Minsk, Belorussia.
1996, University of Exeter, School of Engineering, Research Center MIRCE, Exeter, United Kingdom.
2000, University of Bradford, Department of Mechanical and Medical Engineering, Bradford United Kingdom.
2000, Gosstandart of Russia, All-Russian Scientific and Research Institute for Certification, Moscow, Russia.

Drugi relevantni podaci

From 2000, Academician, Full Member of Russian Quality Problems Academy, Moscow, Russia.
2000-2001, Visiting Professor in Reliability and Maintainability at Ben-Gurion University of the Negev, Department of Industrial Engineering and Management, In Reliability and Maintainability (with emphasis on System Engineering) Beer-Sheva, Israel.
2001, Full Professor in Systems Effectiveness and Quality Management, Faculty of Technical Sciences, Cacak, Serbia.
2001, Assistant Minister, Ministry of Science, Technology and Development, Republic of Serbia.
2001, Corresponding Member of Serbian Engineering Sciences Academy
2001-2002, Visiting Professor in Reliability, Maintainability and Safety at Politechnic University of Valencia, Department of Statistics and Operations Research, In Reliability, Maintainability and Safety Engineering Valencia, Spain.
2007, Visiting Professor in Tools of Quality Management and Improvement at Polytechnic University of Valencia, Department of Applied Statistics, Operations Research and Quality, In Tools of Quality Management and Improvement, Valencia, Spain.
2008, Education and Research Leadership Award, Society for Reliability Engineering, Quality and Operations Management, India.
2011, Visiting Professor in Quality Management and Improvement at Polytechnic University of Valencia, Department of Applied Statistics, Operations Research and Quality, In Quality Management and Improvement,Valencia, Spain.
2011, Visiting Researcher in Reliability, Maintainability and Safety Engineering at Polytechnic University of Valencia, Department of Applied Statistics, Operations Research and Quality, In Reliability, Maintainability and Safety Engineering,Valencia, Spain.
2012, Award for Pioneering International Education and Research in Industrial Quality and Reliability Management, Society for Reliability Engineering, Quality and Operations Management, India.

PUBLIKACIJE

Ljubisa Papic: Fault Tree Simulation for System Reliability Estimation, Proceedings the 12th MIRCE International Symposium System Operational Effectiveness, Exeter, 2002, 9 p.
Ljubisa Papic, Aronov J., Carrion A., San Matias S.: Reliability Testing Plan According to Availability Criterion, Proceedings of eighth ISSAT International Conference Reliability and Quality in Design, Anaheim, 2002, pp. 346-350.
A. Ben-Yair, Z. Sinuany-Stern, Ljubisa Papic: Reliability Cost-Optimization Model, Proceedings 11th Industrial Engineering and Management Conference IE&M, Beer-Sheva, Israel, 2000, pp. 300-304.
D. Golenko-Ginzburg, S. Sitniakovski, Ljubisa Papic: Resource Supportability Simulation Model for a Man-Machine Production System, Mathematics and Computers in Simulation, 53(2000), pp. 105-112.
D. Golenko-Ginzburg, V. Kats, Ljubisa Papic: A High-Speed Reallocation Algorthm for Controlling Man-Machine Production System, Production Planning and Control, 2000, Vol 11, No. 3, pp. 271-280.
Ljubisa Papic: Reliability and Mainatinability, With Emphasis on System Engineering, Lectures for course No. 36421031 (B.A., M.Sc., and Ph.D. studies), Ben-Gurion University of the Negev, Faculty of Engineering Sciences, Department of Industrial Engineering and Management, Beer-Sheva, Israel, 2000.
Ljubisa Papic: Advanced Models in Reliability, Maintainability and Safety Engineering, Handbook of Seminar "Advanced Models in Reliability, Maintainability and Safety Engineering" at the Department of Statistics and Operations research, Politechnic University of Valencia, 23-25 January 2002, Valencia, Spain, 2002.
Ljubisa Papic: Reliability Test-Plans for System Failure Analysis, Proceedings of 7th DQM International Conference on Dependability and Quality Management, DQM-2004, Belgrade, 2004, pp. 55-67.
Mladjenovic M., Ljubisa Papic: Exploring Six Sigma Improvement Methodology, Proceedings of 8th DQM International Conference on Dependability and Quality Management, DQM-2005, Belgrade, 2005, pp. 123-130.
Ljubisha Papich: Integrirovanie Proektirovaniya i Obsluzhivaniya Tekhniki S Ispolzovaniem Novogo Podkhoda v Inzhenernykh Osnovakh Zhiznennnogo Tsikla, Problemy mashinostroeniya i avtomatizatsii, No. 3, 2004, s. 6-10.